KYT · STAINLESS STEEL
Stainless steel304 / 316
304 and 316 describe material grades, not universal suitability. Surface finish, joints and care also matter.
Before choosing
Choose for the use
Cold drinks, hot soup, sauces and direct heating have different requirements. Confirm the intended use before comparing grades and structure.
Look beyond the grade
Mirror, matte, plated and double-wall designs have different cleaning, weight and handling needs, even with the same steel grade.
Consider daily care
Check whether rims, seams and bases are easy to clean and dry. Ask about dishwasher and cleaning-tool restrictions for plated products.
Use & care
304 & 316
- 304 is common in food-service utensils. 316 generally offers better corrosion resistance, but neither is completely rust-proof.
- Induction and microwave suitability cannot be determined from 304 or 316 alone. Check base construction and the individual label.
Everyday cleaning
- Do not leave food or salt on the surface for long periods. Use mild detergent and a soft sponge.
- Rinse thoroughly and dry, including joints and cup rims.
Water spots & rainbow marks
- White marks may be mineral deposits, while rainbow colours often relate to a heat-formed surface film. They do not necessarily indicate damage.
- Identify bare stainless steel or a plated finish before cleaning gently as instructed. Do not immediately scour with steel wool.
Plating & special finishes
- Plated steel is not the same as an uncoated surface that can be polished. Avoid abrasive powders, coarse brushes and harsh cleaners.
- If you find pitting, cracks, peeling or unusual roughness, investigate before trying vigorous polishing.
Terms explained
Material grade
304 and 316 identify material categories; they do not alone specify thickness, coating, intended use or durability in every situation.
Pitting
Localised corrosion forming small holes. It differs from removable water deposits and should be investigated.
A practical example
White marks after washing a cup? Try gentle cleaning and drying to check for water deposits. If there are pits or rough spots, provide photos for assessment instead of grinding the surface.
Common misconception
A magnet is not a reliable way to identify 304 or 316. Confirm the grade from labels and supplier information.
Related catalog products
Explore related categories
General guidance compiled by KYT from its product-guide content. This is not certification for every product. Follow the individual product label and manufacturer instructions; contact KYT if unsure.
Updated: 2026-10-31
KYT · CONTINUE EXPLORING